Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Palm Bay?
Spring replacement in Palm Bay typically costs $180 – $340 for a single torsion or extension spring, including the new spring and the labor to install it safely. If your door has a matched pair, which is the norm on most two-car doors, plan on roughly twice that: about $360 – $680 for both. A free estimate and a written quote lock in the real number before anyone touches the door, and the written estimate is always what sets the final price.
Springs are a safety issue, not just a convenience issue. A snapped torsion spring stores serious tension, and a door that drops can injure someone or damage a car. We handle spring replacement as a core service rather than a sideline, and we work on the brands most Palm Bay homes have. If you’d rather talk it through than read a page, call (833) 468-5770. Estimates are free, and same-day service is often available.
| Job | Typical estimated range |
|---|---|
| Single torsion spring replacement | $180 – $340 |
| Matched pair of torsion springs | About $360 – $680 |
| Single extension spring replacement | $180 – $340 |
| Matched pair of extension springs | About $360 – $680 |
| Spring replacement bundled with cable repair | $310 – $590 combined |
| Roller replacement alongside the spring work | Adds $110 – $220 |
| Full garage door repair, general | $150 – $600 |
Those ranges are typical estimates for the Palm Bay market, not a fixed price list. Every door is different, and a written quote is what sets your actual cost. Aftermarket spring wire varies in quality, and a lowball number usually means thinner wire or a spring sized wrong for the door’s weight.
What Affects Spring Replacement Pricing in Palm Bay?
Palm Bay has a lot of single-story ranch homes with single-wide and double-wide doors, and both are common spring jobs. Most door weight changes with size, insulation, and the material the panels are made from. Here’s what moves the price up or down.
- Number of springs. A matched pair costs about twice a single spring because you’re buying two springs and the labor to balance both. We replace pairs together because a single spring asked to carry a door built for two fails sooner and can throw the door off level.
- Spring type: torsion or extension. Torsion springs mount on a shaft above the door and extension springs run along the sides. Both sit inside the $180 – $340 per-spring range, but extension setups often come with a difference in mounting hardware and safety cables that affects labor time.
- Door weight and height. A standard seven-foot residential door takes a different spring than an eight-foot door, and an insulated double door needs a heavier spring than an uninsulated single. Heavier doors take longer to balance and may cost toward the top of the range.
- Whether anything else failed with the spring. A broken spring can take a cable, a roller or a bearing plate with it. Cable repair runs $130 – $250 and roller replacement runs $110 – $220, and we quote those as separate line items only if your door actually needs them.
- Access and clearance. Cars parked in the bay, a low soffit, or a door that’s jammed in the open position all add labor. We’d rather tell you that up front than surprise you at the end.
- Age of the opener. If the opener’s been straining against a dragging door for a while, it may need attention too. Opener repair is $120 – $320, and if the motor is on its way out we’ll tell you rather than push a repair that won’t hold.
Palm Bay’s warm, humid summers mean doors cycle against heat expansion and the humidity works on hardware all year. Springs themselves don’t rust the way bare steel does, but the hinge plates, rollers and cables around them do, and that friction shows up as extra load on the spring. A door that squeaked for months before it finally gave you a snap often needs more than the spring alone. A written estimate covers all of it, and we don’t add charges mid-job without your say-so.
What’s Included in a Spring Replacement Estimate
Every estimate we write covers the whole job, not just the spring. That means an inspection of the balance, the cables, the track, the rollers and the bottom brackets, plus a test cycle after the new spring goes on. You should walk away knowing your door is level, opens and closes without slamming, and that the opener isn’t fighting it. The eight brands we’re certified on – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor – are the ones most Palm Bay homes already have, so you won’t get handed off to another company for the opener side of the job. One call covers the door and the opener.
Spring Repair vs. Replacement: Which Makes Sense?
Sometimes a spring can be repaired. Most of the time it’s cheaper and safer to replace. A snapped torsion spring can’t be welded or patched back into service, and a spring that’s lost tension needs to be replaced, not re-tensioned indefinitely.
When a repair makes sense
- The spring isn’t broken, but the door is slightly out of balance and the spring just needs adjusting.
- A worn roller or a slipped cable is causing friction, and the spring itself is fine.
- The noise or drag is coming from track alignment or a dry bearing plate, not the spring.
When replacement makes sense
- The spring is snapped, cracked, or separated.
- The door won’t lift without effort, or it lifts but drops partway.
- The spring is visibly unwound, sagging, or the coils are uneven.
- You’ve had the door for a while and you’re hearing a new clicking or popping sound that wasn’t there before.
If it’s the door system and the frame that have reached the end of their life, a new door runs $700 – $2200, and we’ll say so when a repair no longer makes sense. We’d rather give you the honest number than sell you a spring on a door that’s about to fail elsewhere.
How to Save on Spring Replacement
The safest way to save is to fix the problem before it gets worse. A door that’s been dragging for weeks can wear out the opener, and a snapped cable adds $130 – $250 on top of the spring job.
- Get the estimate in writing. Free estimates mean you know the number before anyone starts. Call (833) 468-5770 for one.
- Ask about replacing both springs at once. If one of a matched pair has gone, the other is usually close behind. Doing both in one visit costs about $360 – $680 total and saves a second call-out fee later.
- Keep the door balanced. A door that lifts easily by hand puts less strain on the spring. If it feels heavy, get it checked before the spring snaps.
- Don’t skip a small repair. A $110 – $220 roller replacement now is cheaper than a $180 – $340 spring plus a $120 – $320 opener repair later.
- Choose an experienced technician. Our technicians have up to 12 years of experience, and a spring sized wrong for the door will fail early no matter what it cost.
Can You Replace a Spring the Same Day?
In most cases, yes. Spring replacement is a same-day job when the parts are on hand and the door only needs the spring. Emergency garage door service is available when a stuck or broken door leaves your home or garage open, and we can usually get someone out the same day. If the door won’t move and you can’t secure the house, call (833) 468-5770 right away and we’ll get you booked.
While you wait, keep people and cars clear of the door and don’t try to force it up. A tensioned spring under load is not something to fight with. This is a job for a trained technician, and we take that seriously.
Why Palm Bay Homeowners Call Us for Spring Work
We handle the whole door and the opener, so you’re not managing two companies for one problem. We’re certified to work on the brands most Palm Bay homes have, we handle spring work ourselves rather than sending it out, and we offer installation alongside repair so we can tell you honestly whether a fix or a replacement is the better spend. When a door won’t move, we move fast. The Palm Bay Garage Door Repair Pros team gives you a written estimate, a clear answer, and no upselling.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Palm Bay?
A single spring typically runs $180 – $340, and a matched pair runs about $360 – $680. The exact price depends on spring type, door weight, and whether anything else failed alongside the spring. Call (833) 468-5770 for a free written estimate.
Is it cheaper to replace one spring or both?
One spring is cheaper up front, but replacing both at once usually costs less over time. A single spring asked to carry a door built for two tends to fail early, and a second visit adds a call-out fee. For a pair, budget about $360 – $680 total. Call (833) 468-5770 to confirm which setup your door has.
Can you come out today for a broken spring?
Often, yes. Same-day service is usually available for spring jobs, and emergency service is there for doors that leave your home unsecured. Call (833) 468-5770 and we’ll let you know the soonest we can be out. Estimates are free.
Why did my spring break, and will it happen again?
Springs break from cycle fatigue – the up-and-down count over years of use – and heavier doors or doors with a dragging roller wear a spring out faster. A correctly sized replacement spring and a balanced door is the best protection. Call (833) 468-5770 for an estimate that includes balancing.
Can I replace a garage door spring myself?
No, and we strongly recommend against it. Torsion springs store enough tension to cause serious injury if they’re released wrong, and the tooling to wind them safely is not something most homeowners have. A technician handles it in a controlled way. Call (833) 468-5770 and let us take the risk off your hands – the estimate is free.
Related Pages
- Spring Replacement – see the full spring replacement process and what to expect.
- Palm Bay Garage Door Repair Pros – all our garage door services in Palm Bay.
- Garage Door Repair in Palm Bay – general repair, $150 – $600.
- Garage Door Opener Repair – $120 – $320.
- Garage Door Opener Installation – $250 – $550.
- Garage Door Cable Repair – $130 – $250.
- Garage Door Panel Replacement – $250 – $500.
- Garage Door Track Realignment – $120 – $240.
- Garage Door Roller Replacement – $110 – $220.
- Garage Door Installation – $700 – $2200 for a new door.
- Emergency Garage Door Service – for doors that won’t move.
- Garage Door Repair in Melbourne, FL – nearby city service.
Call (833) 468-5770 for a free estimate. We’ll tell you what your door actually needs, put it in writing, and get your door moving again. Estimates are free, pricing is up front, and the local pro we connect you with is insured and bonded as the state requires, so if you ever need to talk to us, the number is the same one.
Key Takeaways
- A single spring replacement is typically $180 – $340 in Palm Bay; a matched pair is about $360 – $680.
- Matched pairs should be replaced together – a single spring carrying a two-spring door fails early.
- Cable repair ($130 – $250), roller replacement ($110 – $220), and opener repair ($120 – $320) are common add-ons.
- Same-day service is often available, and emergency service covers doors that leave the home unsecured.
- The written estimate sets the final price. Estimates are free – call (833) 468-5770.
Written by the team at Palm Bay Garage Door Repair Pros.
Pricing reflects the Palm Bay market as of 2026. Palm Bay Garage Door Repair Pros offers free estimates – call (833) 468-5770.
What Our Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Jamal Nash"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Maurice Coleman"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Matt Mercer